Characteristics: Timesaver for changing plastic color , convenience for cleaning and protecting the screw. Direction: 1 . Use the cleaner to penetrate the plastic mold for 5 times. 2. Mix and blend with gloves. 3. Do not launch the plastic until one or two minutes after storage. (repeat the above process, avoiding launching continuously) 4. Add the new plastic after cleaning the funnel, continue the new injection molding process after the remaining plastic injected. Caution: Keep away from children. If accidentally spray to eyes, rise with water and consult with the doctor immediately.

A. Direction: Increase the injection molding machine temperature by 10 to 20℃ and blend the clean powder with the plastic then place them into funnel. Slow down the engine, launch the plastic with faster speed. Make the injection molding process every two minutes. B. Usage: Injection molding machine (140T) :80-100g clean powder / 2-4kg plastic (Better to add white mineral oil to prevent the powder splash) C. Caution: Keep away from children. If accidentally spray to eyes, rise with water and consult with the doctor immediately.